CN
Your location: Home > News > Industry news > Micro Cooling Fan blade design considerations
DONGGUAN XINGDONG ELECTRONICS CO., LTD.
Add: NO.2, Dagao Hengfeng 2nd Road, Changping Town, Dongguan, Guangdong, China
Tel:+86-769-83660708
Fax:+86-769-83660718
Email:info@d-fan.com.cn
URL:http://www.hsfangchan.com/eng/
"Micro Cooling Fan" Leaves of curvature: within a certain range, the greater the curvature of the blade, at the same speed, the greater the kinetic energy of the gas, i.e., the larger the air volume and pressure; same time, the greater the drag on the blade, the motor requires greater torque. When the ratio of the arc height / chord length of more than 0.1, it is no longer lift coefficient increases linearly, the "range" that is 0.05 & lt; arc height / chord & lt; 0.1. "Micro Cooling Fan" Blade Angle: angle greater the pressure difference between the upper and lower surfaces of the blade, the greater the pressure at the same speed; but the surface pressure, may have reflux phenomenon, but lower fan performance. Thus, the blade angle also should be raised within certain limits. "Micro Cooling Fan" blade spacing: the distance between the blades is too small, will cause air turbulence, increase the friction surface of the blade, reduce fan efficiency; the distance between the blades is too large, it will lead to increase in pressure loss, lack of pressure.
Previous: The role of 220V Cooling Fan framework
Next: Micro Cooling Fan precise blade design
Home
About Us
History
Advantage
Culture
Honor
Album
Equipment
Video
Site Map
XML
Project case
Solution
Company News
Industry news
F.A.Q
Contact Us
Feedback
Join Us
Copyright©2014 DONGGUAN XINGDONG ELECTRONICS CO., LTD. All Rights Reserved.
Tel:+86-769-83660708 Fax:+86-769-83660718 E-mail:info@d-fan.com.cn
+86-0769-83660708
Home Product News Contact